The column still is more efficient alternative to the pot still , it is capable of continuous distillation By reheating the liquid ,rather than requiring distillation in batches and can produce higher ABV spirits than the pot stills.
During the distillation process, there are three traditional “sections” of the distillate as it runs off the still. Throughout the industry, these are known as the Head, Heart, and Tail.
CUSTOM DISTILLING MACHINE WITH STORAGE TANK FOR THE HEADS/THE HEART/THE TAILS
The distillate’s initial part is called the “head,” and the head's own initial part is called the “foreshot.” The foreshot contains most of the toxic methanol produced as a fermentation byproduct. Most traditional distilleries have a significant amount of foreshots from their pot stills.
The rest of the head constitutes the part of the distillate up to the choice where the distiller starts collecting the ethanol. This is known as the “first cut” from the head to the heart.
Heads contain light, ethereal aromas, but also a significant portion of the methanol being distilled. It is thus a creative choice from the distiller where to cut the heads, to include as much light aroma while excluding methanol.
Traditionally, what happens to the heads differs between distilleries. Some distilleries use them in subsequent distillations, further distilling flavour and ethanol from them. Other distilleries merely throw them away or recycle them another way. Our distillation’s accuracy gives us only tiny amount of heads. We keep them in one of the tanks underneath the still, and redistill them in further distillations.
The “heart” is the main body of the distillate that the distiller keeps. It is the part of the process where most of the ethanol comes through the still, and also contains pleasant flavour compounds. How much of the distillate to keep as the heart before the “second cut” that begins the tail is a creative decision. Heavier, richer flavours obviously appear further along the distillation — as do unpleasant, water-soluble flavours that are plainly unwanted.
Finally, we come to the tail. Once the second cut to the distillate has been made, the still is stopped, but the pot takes a long time to cool down—so much so, that the wash stops evaporating. The liquid that continues to run off the still is called the “tail.”
For us, the tail is only the distillate that has made it into the condenser, as the remaining distillate in the column and basket’s chamber runs through pipes back to the wash.
In conclusion, the Head, Heart and Tail are fundamental distillation characteristic that a distiller needs to intrinsically understand in order to perfect the craft. There are not equal amounts of heads, hearts, and tails volume. Therefore, the distiller will need to pay close attention throughout the duration of the distillation run to determine when the “heads cut” or the “tails cut” needs to be made.
SUPERIOR SPIRITS EQUIPMENT STAINLESS STEEL CONDENSER 500L
RUM WHISKEY STILL POT DISTILLING EQUIPMENT
It is a 500l distiller we made for our customers, which can be used for making vodka, whisky, brandy, rum etc.
It's heated by the steam, other heating methods also can be available.
Copper parts: 500L pot inside,helmet,distillation column and dephlegmator.
It comes with CIP cleaning system and storage tanks for water and spirits.
The sizes and heating methods can be customized according to client's needs.
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours..